![background image](http://html.mh-extra.com/html/hyundai/hych1500e-2/hych1500e-2_user-manual_2196089030.webp)
30
6.B
Blockage removal - To remove blockages DO NOT under any circumstances use
your hands. STOP and disable the machine then undo chutes. Remove the main
shaft cover by undoing the two cover securing bolts, using a spanner (or adjustable
wrench as shown) rotate blades in both directions until machine if free of materials
which have become stuck.
6.C
As the discharged materials pile up, move the chipper or the processed material to
keep the outlet free. DO NOT position the deflector horizontally, as it will reduce the
airflow, impeding discharge and cause a blockage.
6.D
Idle speed - to reduce stress on the engine when wood chipping is not being
performed set throttle control lever to its “SLOW” position. Lowering the engine speed
to idle the engine will help extend the life of the engine, as well as conserve fuel and
reduce the noise level of the machine.
Summary of Contents for HYCH1500E-2
Page 43: ...43 NOTES ...
Page 44: ......