2
7
6.I
Feed only clean materials into the machine. Foreign matter like soil, sand, grit,
stones, pieces of metal, etc. will damage the sharp edge of the cutting knives. Root
balls and dead wood will also blunt the blades quickly. Avoid feeding any flax or roots
into the machine as these stringy materials can wrap around the rotor shaft and work
their way into the bearings.
6.J
Avoid feeding short, stubby pieces of wood into the machine, as they tend to bounce
and spin in the feed hopper. Feed these short pieces together with longer pieces.
After becoming familiar with the machine, prune to suit its capabilities.
6.K
DO NOT force the branches into this machine. Allow the machine to automatically
feed
through.
6.L
NEVER operate the machine on slopes.
6.M
DO NOT alter or adjust any part of the wood chipper or its engine that is sealed by
the manufacturer or distributor. Only a qualified service technician may adjust parts
that may increase or decrease governed engine speed.
6.N
This wood chipper is for off-road use only. NEVER attempt to tow the machine on
public highways, roads, or thoroughfares.
6.O
NEVER operate this machine without feed hopper or discharge chute properly
attached to the machine.
6.P
Move the machine at least 3m away from the refueling point before starting engine.
6.Q
ALWAYS check the oil level of the engine before use.
6.R
Inspect that all nuts and bolts are tight and well connected to ensure the safety and
reliability of this machine prior to any operation.
6.S
Inspect the air pressure in the tyres prior to use and pay attention to sharp objects
when moving the machine to prevent the tyres from being pierced.
Summary of Contents for HYCH1500E-2
Page 43: ...43 NOTES ...
Page 44: ......