9
Reset
If you reset the phone, all the settings will return to the factory default
settings.
1. Press
PROG
during standby. Then press and hold
DEL
until
RESET
is displayed
.
2. Press
OK
to confirm the action.
You cannot reset the phone if the handset has lost link with the base.
UNAVAIL
will be displayed. Re-establish the link and try again.
OTHER FEATURES
Key lock
Press and hold during standby to lock the keypad. appears
whenever keypad is locked.
When the keypad is locked, you can still answer an incoming call by
pressing . During the call, the keypad functions as normal. When the
call is ended, the keypad will be locked again.
To unlock the keypad, press any key and then press
OK
when you see
PRESS OK
.
Shortcut to turn handset ringer on/off
You can use this shortcut to turn on/off the handset ringer when the phone is
in standby. Simply press and hold .
appears whenever the handset
ringer is turned off.
Message waiting indication
If you have subscribed to the voicemail service from your telephone
company,
turns on when you have a new message in your mailbox. After
you’ve listened to all the new messages,
will turn off. You can also turn it
off by pressing
for 2 seconds during standby.
Paging the handsets
You can page or locate the handsets by pressing the
on the base. All
handsets registered to the base will produce the paging tone for 30 seconds
and the screen displays blinking “####”.
You could stop the paging by pressing any key on each handset or pressing
the
on the base again.
Out of range warning
When you are talking on the phone and you take the handset too far away
from the base, you’ll hear an alert tone through the receiver. You should
bring the handset back in range with the base. Failing to do so will result in
the call being disconnected.
When the handset is too far away from the base during standby, you will see
flashing.
MULTI-HANDSET OPERATION
You are offered with these additional features if you have 2 or more handsets
registered to the base.
Answering an internal call
When you receive an intercom call, your handset will ring with
blinking.
You can see the calling handset number on the screen.
If you press when the phone is ringing, the handset ringer will be
turned off for this incoming internal call.
Press to answer.
Making an internal call
When the phone is in standby,
1. Press
INT
.
turns on and you’ll hear an internal dialing tone.
2. Press the number of the handset that you want to call.
(Or you can press the handset number first, followed by
INT
.)
OTHER FEATURES
MULTI-HANDSET OPERATION
