![background image](http://html.mh-extra.com/html/hyundai/hdt-l3/hdt-l3_user-manual_2197415005.webp)
5
Predialing
Pre-dial allows you to enter a telephone number and verify it on the screen
before you place the call. The screen displays the last 12 digits dialed but
you can enter up to 20 digits.
1. Enter the phone number.
2. To enter a pause, press and hold
#
. A pause is displayed as “P”.
3. When you enter more than 12 digits, turns on. If you attempt to enter
more than 20 digits, you’ll hear a reject tone.
4. If you make a mistake, press
DEL
to erase one digit at a time. Or you
can press
to clear the entire number and return the phone to
standby.
5. Press to dial out the number.
Dialing from a phonebook record
1. Press
. during standby.
in the display turns on.
2. Press
to search for the record that you would like to dial
.
Or
you can use the number keys to jump directly to the record starting with
the corresponding letters of that key.
3. Press
OK
repeatedly will show the name and number of the record
accordingly.
4. Press to dial out the number.
Redialing the last dialed number
1. Press
. The last number dialed is displayed.
2.
turns on when the number contains more than 12 digits. Press
OK
to
view the off-page digits.
3. Press to dial out the number.
During an external call
Call timer
The call timer will be displayed a short while after your call is connected. It
shows the duration of the call. This timer is shown in minutes and seconds
(MM-SS) in the first hour. After that, it will be shown in hours and minutes
(HH-MM) with the “-“ blinking to indicate the seconds.
When you end a call, the timer will be displayed for 5 more seconds before
the screen returns to the handset label.
Adjusting the volume
Press
to adjust the receiver volume. The display shows the
volume level of high “
OOO
”, medium “
OO
” or low “
O
”.
Muting the call
1. Press
MUTE
to mute the call. turns on. The caller would not be able
to hear you but you would still be able to hear the caller.
2. Press
MUTE
again to unmute the call.
Chain dialing
You can dial out numbers from the phonebook even after you have seized
the phone line. And there is no limit to the number of times chain dialing is
accessed.
1. Press
.
turns on.
2. Press
to scroll through the phonebook records. Or you can
use the number keys to jump directly to the record starting with the
corresponding letters of that key. If you decide to quit using chain
dialing, simply press
to exit.
3. Press
OK
to dial out the number.
Receiving a second call
If you have subscribed to the service of CID on Call Waiting, the telephone
will show the phone number of another incoming call while you are talking on
the phone.
1. Press
to put the current call on hold and talk with the second caller.
2. Subsequent presses of
will toggle you between these 2 callers.
Caller information of this second call will be stored in the call log.
CALLER ID
If you subscribe to the Caller ID service, your phone automatically stores the
last 10 incoming calls. Each record holds up to 20 digits.
01-10
CALLER ID