8
Base ringer melody & volume
1. Press
PROG
during standby and press
or
until you see
flashing.
2. Press
OK
to select.
3. Press
to listen to and select from the 5 melodies.
4. Press
OK
to confirm your selection and you will be prompted to volume
Setting.
5. Press
to listen to and select from the different volume levels.
6. Press
OK
to confirm your selection.
You have the option to turn off the base ringer.
You cannot program the base ringer if the handset has lost link with the
base.
UNAVAIL
will be displayed. Re-establish the link and try again.
Recall duration
When you are talking on the phone, pressing
will send a flash signal.
There are 2 factory programmed recall timings for you to choose from. Check
with your local telephone company if you are not sure which duration to set
and the functions performed with the flash signal.
1. Press
PROG
during standby and press
until you see
flashing.
2. Press
OK
to select. The current duration is now displayed.
3. Press
1
or
2
directly or press
to select.
4. Press
OK
to confirm.
Dial mode
Tone or pulse dialing mode can be changed in this menu.
1. Press
PROG
during standby and press
until you see
flashing.
2. Press
OK
to select. The current setting is now displayed.
3. Select
1
for
TONE
or
2
for
PULSE
or press
to select.
4. Press
OK
to confirm.
If the dialing mode is set to pulse, you can press and hold the
¾
key to set a
temporary DTMF during off hook. “d” will be displayed on the screen. All the
digits dialed after “d” will be dialed as DTMF tones until you hang up.
Register
Each handset can register to one base at a time only. The current base will
be deregistered when a new base is registered.
Each base can register up to 4 handsets.
1. Press
PROG
during standby and press
or
until you see
icon flashing.
2. Press
OK
to select.
3. Before you enter the PIN, press and hold
on the base for 2 seconds
until a registration tone is emitted. The base is now in the registration
mode. (If the base is full and cannot take on any more handset, it will
emit a reject tone instead. See the section of
Deregister
to delete a
currently registered handset.)
4. Enter the PIN of the base and press
OK
.
You will hear a confirmation tone if the registration is successful. The
handset label and the handset number will be displayed.
If the registration is not successful, you will see
NOT REG
on the handset.
Follow the procedure and try again.
Deregister
A handset can deregister another handset registered to the same base. It
cannot deregister itself.
1. Press
PROG
during standby follow by the 9 key.
2. Enter the handset number (i.e. HS#2) to delete. The LCD will display 9-2.
3. Press
OK
and then
4. Enter the PIN
5. Press
OK
to confirm.
PIN code
A PIN is required for registration and deregistration. The ex-factory PIN is
0000 but you can change this code.
1. Press
PROG
during standby follow by the 8 key.
2. Enter the current PIN and press
OK
.
3. Enter the new PIN. It can contain from 0 up to 8 digits. Press
OK
.
4. Repeat the new PIN and press
OK
to confirm the new code. You will
hear a confirmation tone if it is successful, or a reject tone if the same
PIN is not entered.
