10
You will hear a busy tone if the other handset is not available.
To end an internal call, press or return the handset to the base
cradle.
You will be alerted with short beeps if you receive an external call during your
intercom. Caller information will be displayed if it is available. You need to
end the intercom first before you can answer the external call.
During an external call
Inquiry call
1. Press
INT
to put the external line on hold.
2. Press the handset number that you want to call.
3. After the other handset has answered, you can press
INT
repeatedly to
switch between the external line and the intercom.
If the other handset does not answer, press
INT
again to cancel the attempt
and return to the external line.
Call transfer
While you are in an inquiry call with the other handset, press or return
the handset to the base cradle. The call has now been transferred.
Conference call
While you are in an inquiry call with the other handset, press and hold
CONF
to set up a conference call between the external line and the 2 handsets.
During the conference call, pressing
CONF
will put the external line on hold
and you can talk to the other handset in private. Press and hold
CONF
to
establish the conference call again.
Any handset hangs up during a conference call will leave the other handset
still connecting with the external call.
DEFAULT SETTING
Default settings are as follow:
Handset ringer melody: 1
Handset ringer volume: Level 3
Base ringer melody: 1
Base ringer volume: Level 3
Recall duration: Duration 1
Dial mode: Tone
Receiver volume: Medium
Key lock: Off
Message waiting indication: Off
•
Settings not listed here are not affected by resetting.
TROUBLESHOOTING
Are you having trouble with your phone? Here are some of the most
common problems and solutions.
Problems Solutions
The phone does not work
at all
•
Make sure that adapter and phone cord are
connected properly.
•
Check that the batteries are fully charged
and installed properly.
•
This phone does not work during power
failure.
The phone does not ring
•
Make sure the adapter and the phone cord
are connected properly.
•
Move the handset closer to the base unit.
•
Make sure the handset (or base) ringer is
turned on.
There is no dial tone
•
Check that the phone cord is connected
properly.
•
Check the handset is fully charged.
•
Move the handset closer to the base unit.
CID does not work
properly
•
Check with your local phone company that
the CID service is subscribed to.
•
Let the phone ring at least once before
answering.
TROUBLESHOOTING
DEFAULT SETTING
