About Your Phone
6
About your phone
THE HANDSET
1
Left & Right Soft keys
Use to perform function displayed above
the key. It is displayed as text in a shaded
box (i.e.
MENU
) in this user guide.
2
Talk key & Recall key
Make and receive calls
Send a flash signal
3
End & On/Off key
End current call
Exit menu / operation
Turn handset on/ off
4
Up Navigation & Phonebook key
Scroll up menu items
Increase ringer and receiver volume
Enter phonebook record review
5
Down Navigation & Phonebook key
Scroll down menu items
Reduce ringer and receiver volume.
Enter phonebook record review
6
Digit keys
Dial digits
Enter characters
7
Star & Ringer Off key
Dial *
Turn ringer on / off
8
Pound, Keylock, & Pause key
Dial #
Enter a pause
Lock / unlock keypad
9
Speaker key
Turn the speaker on / off
10
Intercom key
Make intercom call
Start conference call
11
Call Log key
Enter incoming call log
THE BASE
1
Page key
Find handset(s)
Enter registration mode
The System
REGISTERING YOUR HANDSET WITH ADDITIONAL BASE
This section shows you how to register your handset to additional base unit(s). If your handset
displays
UNREGISTERED
, refer to
Registering your handset
on page
9
.
1.
Press
on the base unit for 4 seconds.
2.
Press
MENU
on the handset.
3.
Select
SYSTEM
. Press
OK
.
4.
Select
REGISTER
. Press
OK
.
5.
Use
to select the base number you want.
6.
Enter the system PIN (Pre-set: 0000). Your handset starts searching for the base.
This base number will be assigned to the base unit you are about to register to.
Your handset starts searching for the base.
Registration shall be completed within 30 seconds.
SELECTING A BASE UNIT
You can switch your handset between different registered base units. You can program the
handset to automatically connect to the closest base unit or only connect to a fixed base unit
you have specified.
1.
Press
MENU
.
2.
Select
SYSTEM
. Press
OK
.
3.
Select
SELECT BASE
. Press
OK
.
4.
Select the base unit you want or select
AUTO
if you want your handset to
automatically connect to the closet base unit.
5.
Press
OK
. The new setting is saved.
DELETING A HANDSET
Use one handset to delete (de-register) another handset that shares the same base unit.
1.
Press
MENU
.
2.
Select
SYSTEM
. Press
OK
.
3.
Select
DELETE HS
. Press
OK
.
4.
Select the handset (number) you want to delete. Press
OK
.
5.
Enter the system PIN. Use
CLEAR
to make correction.
TIP:
Handset Number.
The handset number displays beside the handset name
during standby.
TIP:
Use
to navigate the menus.
NOTE:
Each handset can register up to 4 base units. After registering to 4 base
units, your handset registration memory is full. If you attempt to register to
additional base units, registration will not be successful.
23
