7
.
Proper use
This device is designed for vacuuming up normal house dust. It is only intended
for private indoor use and not suitable for commercial application.
Before fi rst use
Before you can use the device, you must:
unpack the product contents and remove all transport and packaging elements,
insert batteries in the remote control,
fi tting the side brushes,
set up the charging station,
charge the device’s rechargeable battery.
Baterries inserting to remote control
Push battery compartment cover on the back side of remote control to open
the battery compartment.
Insert the batteries to the compartment observing the polarity (AAA batteries
excluding from the set).
Push the battery cover back into the remote until it clicks.
Side brushes assembling
Place the device upside down on the floor or table
Insert the side brush with the letter R into the hole with the letter R
Insert the side brush with the letter L into the hole with the letter L
If the brushes are properly installed, a click should sound
Charging battery station
For battery charging, the device’s charge contacts and the charging station
must always be clean. Wipe them with soft dry cloth from time to time to
achieve it.
Install the charging station on a clean, level floor, back to the wall near the
power socket.
There should be no obstacles on the way of device to the charging station.
There should be 1.5-2 meters of free space, without furniture and other items
before the charging station. There should be no reflective surfaces (e.g.
mirrors) behind the charging station.
Connect the adapter to the charging station, plug the adapter to the power
socket.
Battery charging
Fully discharge and re-charge the battery every few months.
It takes about 12 hours to charge the battery before the device is turned on for
the first time, or if the device has not been used for a long time and 3-4hours
for next charging. The battery will be charged up to maximum level after 2-3
cycles of full charge and discharge.
If the device is completely discharged and cannot return to the charging station
itself, put it on the charging station manually.
Charging from charging station
The device returns to the charging station when the battery charge almost run
down, where the battery will be recharged automatically. The charging station
should be connected with power socket to do it.
Summary of Contents for H-VCRQ60
Page 5: ...5 ...