Hyundai H-VCRQ60, Instruction Manual

Page: 9 / 28

9
.
This button is used to pause and restart the device from the pause. Also
this button saves the preset settings
Suction power setting button
This button allows you to change the suction force: from normal suction to high
sunction level.
Clock setting button
Press the button to enter the Clock setting button with help of buttons
to set the time. Press button to confirm the setting.
Single room cleaning button
Close the door of single room, which you are going to clean and press the
button.
Mopping setting button
Press the button to activate this function.
Cleaning schedule setting button
Press the button when the device is on pause mode, enter to the cleaning start
time setting. Set the time using
buttons for cleaning start
time .
Edge cleaning button
Press the button to start edges cleaning.
Operation

The device has the memory mode to memorize the cleaning areas and not to
clean them again

Switch on the device by Power switch button on the side of the body. The green
indicator will light on.

Press Switch on button on the remote control or control button on the
body, the device will start the cleaning automatically.

The device works about 100 minutes if you do not switch off it and returns to
the base automatically.

Operating time at maximum power is 80 minutes

Water tank using

The vacuum cleaner includes a water tank, which allows the device not only to
suck dust, but also to mop the floor.

The function of vacuum cleaner and floor washing cannot be used at one time.

Attach the mopping cloth to wash the floor by Velcro to the water tank.