8-67
08
3. Remove the socket from the as-
sembly by turning the socket coun-
terclockwise until the tabs on the
socket align with the slots on the
assembly.
4. Insert a new bulb by inserting it into
the socket and rotating it until it
locks into place.
5. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
6. Install the turn signal light or low
beam assist-static light bulb cover
by turning it clockwise.
Daytime Running Light &
Position Light, Front Fog Light
(if equipped)
OAC3089038TU
OAC3089038TU
Daytime Running Light & Position Light
Daytime Running Light & Position Light
Front Fog light
Front Fog light
OAC3089037TU
OAC3089037TU
1. Remove the under cover by rotat-
ing the screws and bolts.
2. Reach your hand into the back of
the front bumper.
3. Disconnect the power connector
from the socket.
4. Remove the bulb-socket from the
housing by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the housing.
5. Install the new bulb-socket into the
housing by aligning the tabs on the
socket with the slots in the hous-
ing. Push the socket into the hous-
ing and turn the socket clockwise.
6. Connect the power connector to
the socket.
7. Reinstall the front bumper under
cover.
Daytime Running Light &
Position Light
(LED Type, if equipped)
Your vehicle is equipped with LED
lamps. LED lamps do not have re-
placeable bulbs. If the LED lamp
does not operate, we recommend
that the vehicle be checked by an au-
thorized HYUNDAI dealer.
