5-28
Convenient features
The ignition switch must be in the ON
position to be able to raise or lower
the windows. Each door has a Power
Window switch to control that door’s
window. The driver has a Power
Window Lock switch which can block
the operation of passenger windows.
The power windows will operate for
approximately 30 second after the
ignition switch is placed in the ACC or
OFF position. However, if the front
doors are opened, the Power
Windows cannot be operated even
within the 30 second period.
WARNING
To avoid serious injury or death,
do not extend your head, arms or
body outside the windows while
driving.
i
Information
• In cold and wet climates, power
windows may not work properly
due to freezing conditions.
• While driving with the rear win-
dows down or with the sunroof (if
equipped) opened (or partially
opened), your vehicle may demon-
strate a wind buffeting or pulsation
noise. This noise is normal and can
be reduced or eliminated by taking
the following actions. If the noise
occurs with one or both of the rear
windows down, partially lower both
front windows approximately 2.5
cm (one inch).
If you experience the noise with the
sunroof open, slightly close the sun-
roof.
Window opening and closing
OAI3059009
OAI3059009
To open or close a window, press
down or pull up the front portion of the
corresponding switch to the first
detent position (5).
Auto down window (if equipped)
(Driver’s window)
OAC3059015TU
OAC3059015TU
Pressing the power window switch
momentarily to the second detent
position (6) completely lowers the
driver’s window even when the switch
is released. To stop the window at the
desired position while the window is
in operation, pull up and release the
switch to the opposite direction of the
window movement.
