Hyundai EQUUS 2016, Owner'S Manual

Page: 67 / 477

Securing a child restraint to the
lower anchor
Some manufacturers produce child
restraints, which are labeled as
LATCH or LATCH-compatible.
LATCH stands for "Lower Anchors
and Tethers for Children". These
child restraints are equipped with two
rigid or webbing-mounted attach-
ments, which are to be connected to
the two LATCH anchors in a specific
seat of your vehicle. This type of child
restraint does not use a seat belt to
be attached in a rear seat.
A sign is marked on the left rear and
right rear seatbacks to indicate the
location of the lower anchors for child
restraints.
LATCH anchors are equipped in your
vehicle. The LATCH anchors are
located in the left rear and right rear
seats. Their locations are shown in
the illustration. There is no LATCH
anchor in the rear center seat.
The LATCH anchors are located
between the seatback and the seat
cushion. Follow instructions of the
child restraint manufacturer to prop-
erly install a LATCH or LATCH-com-
patible child restraint.
Upon installing the LATCH child
restraint, make sure that the seat is
properly attached to the LATCH and
tether anchors.
2-40
Safety system of your vehicle
OVI035060N
OVI035036N
Lower Anchor
Lower Anchor
Position Indicator
• When using the vehicle's
"LATCH" system to install a
child restraint in a rear seat,
all seat belts taps of unoccu-
pied seats should be securely
buckled in metal latch plates,
and the seat belt webbing
must be fully retracted behind
the child restraint to prevent
the child from reaching or
holding any un-retracted seat
belts. Child's reaching to any
un-buckled metal latch plates
or tabs may result in strangu-
lation, serious injury or death
to the child.
• Do not place anything around
the lower anchors. Also make
sure that the seat belt is not
caught inside the lower
anchors.
WARNING