04
CUT-
401
2. General Description
The plasma cutters are made by the most advanced inverter technology. 50Hz/60Hz frequency is inverted to
high frequency (frequency is over 1 00 KHz), the step down voltage and rectification current, inverter power
supply generates powerful DC welding current through PWM technology. Because inverter technology of
switch power is used, dimensions and weight of main transformer has reduced substantially and efficiency
has increased 30%. Piloting arc system can strike arc easily with principle of high frequency oscillating. It has
the function that it can supply gas ahead and turn off gas delayed.
The cutting machine has characteristics as following:
1. Stabilizing.
2. Reliability.
3. Lightness.
4. Save-energy and no noise.
5. High cutting speed.
6. Cutting smoothly and no polish demands.
Cutting machine can be used widely; it is suitable for cutting stainless steel, alloy steel, mild steel, copper and
other color metal materials.
3. Main Parameters
Model
Rated Input Voltage M
Rated Input Power (KVA)
Rated Input Current (A)
Rate Output Current & Voltage
No-load Voltage M
Rated Duty Cycle (%)
Protection Class
Insulation Class
Pilot Arc Model
Burner Inter Diameter (mm)
Pressure of Air Compressor (kg)
Cutting thickness (mm)
Net weight (kg)
HYUNDAI
CUT-401
1 PAC 23011, 50Hz
6.9
30
40A/96V
240
60
IP21S
F
HF Oscillating
4-5
1-12
10
Summary of Contents for CUT- 401
Page 13: ...11 HYUNDAI CUT 401...
Page 15: ......