Hyundai CUT- 401, User Manual

Page: 10 / 16

08
7. Maintenance
1) Remove dust by compressed air regularly. If cutting machine is placed in the environment where is polluted
with smoke and dust, cutting machine must be cleaned every day.
2) Use adequate pressure for cutting in order to protect small components.
3) Make sure the (thread) connectors on PCBs are connected and tightened firmly.
4) Avoid water into machine, but in case water comes into the machine, it must be dried in time and checked
for insulation by meter. Only after it is made sure that there is no problem, the machine can be operated.
5) If the machine is not used for long time, it should be put in its own packing box and stored in dry environment.
-
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
HYUNDAI
CUT- 401