1
FEATURES OF YOUR HYUNDAI
77
B340B01A-AAT
Lane Change Signal
To indicate a lane change, move the
lever up or down to a point where it
begins flashing.
The lever will automatically return to
the center position when released.
HTG2108
B340C03L-AAT
Headlight Switch
To operate the headlights, turn the bar-
rel on the end of the multi-function
switch. The first position turns on the
parking lights, sidelights, tail lights and
instrument panel lights. The second
position turns on the headlights.
NOTE:
The ignition must be in the "ON"
position to turn on the headlights.
HTG2103
MULTI-FUNCTION LIGHT
SWITCH
B340A01A-AAT
COMBINATION TURN SIGNAL,
HEADLIGHT AND HIGH-BEAM
SWITCH
Turn Signal Operation
Pulling down on the lever causes the
turn signals on the left side of the car to
blink. Pushing upwards on the lever
causes the turn signals on the right
side of the car to blink. As the turn is
completed, the lever will automatically
return to the center position and turn
off the turn signals at the same time. If
either turn signal indicator light blinks
more rapidly than usual, goes on but
does not blink, or does not go on at all,
there is a malfunction in the system.
Check for a burned-out fuse or bulb or
see your Hyundai dealer.
Summary of Contents for Azera 2005
