5
VEHICLE MAINTENANCE REQUIREMENTS
7
EXPLANATION OF SCHED-
ULED MAINTENANCE ITEMS
F060M01A-AAT
o Engine Oil and Filter
The engine oil and filter should be
changed at the intervals specified in
the maintenance schedule. If the car
is being driven in severe conditions,
more frequent oil and filter changes
are required.
F060B01NF-GAT
o Drive Belts
Inspect all drive belts for evidence of
cuts, cracks, excessive wear or oil
saturation and replace if necessary.
Drive belts should be checked periodi-
cally for proper tension.
F060C01A-AAT
o Fuel Filter
A clogged filter can limit the speed at
which the vehicle may be driven, dam-
age the emission system and cause
hard starting. If an excessive amount
of foreign matter accumulates in the
fuel tank, the filter may require re-
placement more frequently.
After installing a new filter, run the
engine for several minutes, and check
for leaks at the connections. Fuel fil-
ters should be installed by trained
technicians.
F060D01A-AAT
o Fuel Lines, Fuel Hoses and
Connections
Check the fuel lines, fuel hoses and
connections for leakage and damage.
Have a trained technician replace any
damaged or leaking parts immediately.
F060G01A-AAT
o Vapor Hose and Fuel Filler Cap
The vapor hose and fuel filler cap
should be inspected at those intervals
specified in the maintenance sched-
ule. Make sure that a new vapor hose
or fuel filler cap is correctly replaced.
F060F01A-AAT
o Vacuum, Crankcase
Ventilation Hoses
Inspect the surface of hoses for evi-
dence of heat and/or mechanical dam-
age. Hard and brittle rubber, cracking,
tears, cuts, abrasions, and excessive
swelling indicate deterioration. Particu-
lar attention should be paid to examine
those hose surfaces nearest to high
heat sources, such as the exhaust
manifold.
Summary of Contents for Azera 2005
