Hyundai Azera 2005, Owner'S Manual

Page: 257 / 297

6
DO-IT-YOURSELF MAINTENANCE
21
G190A02NF-GAT
Drive belts should be checked periodi-
cally for proper tension. At the same
time, belts should be examined for
cracks, wear, fraying or other evidence
of deterioration and replaced if neces-
sary.
When a new belt is replaced, the belt
should be located within the pulley of
flat idler.
Belt routing should also be checked
to be sure there is no interference
between the belts and other parts of
the engine.
NOTE:
Drive belt tension is adjusted auto-
matically by the auto tensioner.
CHECKING DRIVE BELTS
G140D02NF
Power steering
COMP
Water pump pully
Generator
Damper pulley
Auto tensioner
CHECKING AND REPLAC-
ING FUSES
G200A01A-GAT
Replacing a Fusible Link
A fusible link will melt if the electrical
circuits from the battery are ever over-
loaded, thus preventing damage to
the entire wiring harness. (This could
be caused by a short in the system
drawing too much current.) If this
ever happens, have a Hyundai dealer
determine the cause, repair the sys-
tem and replace the fusible link. The
fusible links are located in a relay box
for easy inspection.
HNF4004
The parking brake pedal should be
checked periodically for proper stroke.
If you feel loose in the parking brake
pedal when the parking brake is en-
gaged, have your parking brake ad-
justed by an authorized Hyundai dealer.
CHECKING PARKING
BRAKE PEDAL
G185A01TG-GAT
CAUTION:
If the parking brake pedal is not
adjusted properly, the vehicle may
roll backwards when parking on a
steep hill.
!