6
DO-IT-YOURSELF MAINTENANCE
22
1. Turn off the ignition and all other
switches.
2. Open the fuse box and examine
each fuse. Remove each fuse by
pulling it toward you (a small "fuse
puller" tool is contained in the relay
and fuse box of the engine room to
simplify this operation).
G200B02NF
3. Be sure to check all other fuses
even if you find one that appears to
have burned out.
G200B01NF-GAT
Replacing Accessory Fuse
G200B01TG
The fuse box for the lights and other
electrical accessories will be found in
the left side of the crash pad. Inside
the box you will find a list showing the
circuits protected by each fuse.
If any of your car's lights or other
electrical accessories stop working, a
blown fuse could be the reason. If the
fuse has burned out, you will see that
the metal strip inside the fuse has
burned through. If you suspect a blown
fuse, follow this procedure:
CAUTION:
When replacing a fusible link, never
use anything but a new fusible
link with the same or lower amper-
age rating. Never use a piece of
wire or a higher-rated fusible link.
This could result in serious dam-
age and create a fire hazard.
!
Summary of Contents for Azera 2005
