6
DO-IT-YOURSELF MAINTENANCE
17
!
To add brake fluid, first wipe away
any dirt then unscrew the fluid reser-
voir cap. Slowly pour the recom-
mended fluid into the reservoir. Do
not overfill. Carefully replace the cap
on the reservoir and tighten.
G120E02A-AAT
Adding Brake Fluid
WARNING:
Handle brake fluid carefully. It can
damage your vision if it gets into
your eyes. Use only DOT 3 or DOT
4 specification fluid from a sealed
container. Do not allow the fluid
can or reservoir to remain open
any longer than required. This will
prevent entry of dirt and moisture
which can damage the brake sys-
tem and cause improper opera-
tion.
HTG5015
G120C02A-AAT
Recommended Brake Fluid
Use only hydraulic brake fluid con-
forming to DOT 3 or DOT 4 specifica-
tions in your braking system. Follow
the instructions printed on the con-
tainer.
G120D01A-AAT
To Check the Fluid Level
The fluid level in the brake fluid reser-
voir should be checked periodically.
The level should be between the "MIN"
and "MAX" marks on the side of the
reservoir. If the level is at or below
the "MIN" mark, carefully add fluid to
bring it up to "MAX". Do not overfill.
Summary of Contents for Azera 2005
