manualshive.com logo in svg

Hyundai 2010 Genesis, Owner'S Manual

The Hyundai 2010 Genesis Owner's Manual is a comprehensive guide that provides detailed instructions and valuable information for owners of this high-performance vehicle. Easily downloadable for free from manualshive.com, this manual is an essential companion for anyone seeking to maximize their driving experience with the Hyundai 2010 Genesis.

Share
Download
background image

3 23

Safety features of your vehicle

C020302AKM

Restraint of pregnant women  

Pregnant women should wear lap/shoul-
der belt assemblies whenever possible
according to specific recommendations
by their doctors. The lap portion of the
belt should be worn AS SNUGLY AND
LOW AS POSSIBLE.

C020303AUN

Injured person

A seat belt should be used when an
injured person is being transported.
When this is necessary, you should con-
sult a physician for recommendations.

C020304AUN

One person per belt

Two people (including children) should
never attempt to use a single seat belt.
This could increase the severity of
injuries in case of an accident.

C020305ABH

Do not lie down

To reduce the chance of injuries in the
event of an accident and to achieve max-
imum effectiveness of the restraint sys-
tem, all passengers should be sitting up
and the front and rear seats should be in
an upright position when the car is mov-
ing. A seat belt cannot provide proper
protection if the person is lying down in
the rear seat or if the front and rear seats
are in a reclined position.

WARNING

Riding with a reclined seatback
increases your chance of serious
or fatal injuries in the event of a col-
lision or sudden stop. The protec-
tion of your restraint system (seat
belts and air bags) is greatly
reduced by reclining your seat.
Seat belts must be snug against
your hips and chest to work proper-
ly.

The more the seatback is

reclined, the greater the chance
that an occupant's hips will slide
under the lap belt causing serious
internal injuries or the occupant's
neck could strike the shoulder belt.
Drivers and passengers should
always sit well back in their seats,
properly belted, and with the seat-
backs upright.

WARNING 

- Pregnant

women

Pregnant women must never place
the lap portion of the safety belt
over the area of the abdomen
where the fetus is located or above
the abdomen where the belt could
crush the fetus during an impact.

Summary of Contents for 2010 Genesis
















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Genesis

Happy Orange USB-C Quick Start Manual preview
USB-C
Brand: Happy Orange Pages: 2
Quadratec QuadraTop Adventure Top S Installation Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 20
Calix M5T 187A Assembly Instructions preview
M5T 187A
Brand: Calix Pages: 5
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
kincrome K12071 Owner'S Assemble And Operating Manual preview
K12071
Brand: kincrome Pages: 6
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
Jeep 2014 Grand Cherokee SRT8 Owner'S Manual preview
2014 Grand Cherokee SRT8
Brand: Jeep Pages: 596
Skoda 1K0 051 437 Assembly Instructions preview
1K0 051 437
Brand: Skoda Pages: 4
Zap XEBRA ZAPCAR Series Owner'S Manual preview
XEBRA ZAPCAR Series
Brand: Zap Pages: 16
Reese Explore 63153 Instruction Manual preview
63153
Brand: Reese Explore Pages: 9
Maserati Grecale 2023 Owner'S Manual preview
Grecale 2023
Brand: Maserati Pages: 302
Brink 4698 Fitting Instructions Manual preview
4698
Brand: Brink Pages: 26
Toro Security Cage Kit Installation Instructions Manual preview
Security Cage Kit
Brand: Toro Pages: 8
BMW i wallbox Installation Instructions Manual preview
i wallbox
Brand: BMW Pages: 40
Suzuki SX4 2016 Owner'S Manual preview
SX4 2016
Brand: Suzuki Pages: 504
Cadillac 2005 XLR Owner'S Manual preview
2005 XLR
Brand: Cadillac Pages: 438
Subaru impreza 2017 Owner'S Manual preview
impreza 2017
Brand: Subaru Pages: 786

Brands by name

Popular brands

Load more brands