manualshive.com logo in svg

Hyundai 2010 Genesis, Owner'S Manual

Share
Download
Hyundai 2010 Genesis Owner'S Manual Download Page 175

Features of your vehicle

98

4

D250202AEN-EU

To defrost outside windshield  

1. Set the fan speed to the highest

(extreme right) position.

2. Set the temperature to the extreme hot

(HI) position.

3. Press the defrost button (

).

4. The outside (fresh) air position will be

selected automatically.

If the 

position is selected, lower fan

speed is adjusted to a higher fan speed.

D250300AUN-EU

Defogging logic

To reduce the possibility of fogging up
the inside of the windshield, the air intake
is controlled automatically according to
certain conditions such as  

or 

position. To cancel or return the defog-
ging logic, do the following.

D250302AUN

1. Turn the ignition switch to the ON posi-

tion.

2. Select the defrost position pressing

defrost button (

).

3. While holding the air conditioning but-

ton (A/C) pressed, press the air intake
control button at least 5 times within 3
seconds.

The indicator on the air intake control
button blinks 3 times with 0.5 second of
interval. It indicates that the defogging
logic is canceled or returned to the pro-
grammed status.

If the battery has been discharged or dis-
connected, it resets to the defog logic
status.

OBH049104

OBH048105

Summary of Contents for 2010 Genesis
















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands