manualshive.com logo in svg

Hyundai 2010 Genesis, Owner'S Manual

Share
Download
Hyundai 2010 Genesis Owner'S Manual Download Page 345

Maintenance

30

7

G190300ABH

Reset items

Items should be reset after the battery
has been discharged or the battery has
been disconnected.
• Auto up/down window (See section 4)
• Sunroof (See section 4)
• Driver position memory system 

(See section 4)

• Trip computer (See section 4)
• Climate control system 

(See section 4)

• Clock (See section 4)
• Audio (See section 4)

WARNING

• Before performing maintenance

or recharging the battery, turn off
all accessories and stop the
engine.

• The negative battery cable must

be removed first and installed
last when the battery is discon-
nected.

• Operation related to the battery

should be done in an authorized
HYUNDAI dealer.

CAUTION

• Keep the battery away from water

or any liquid.

• The battery is in the trunk, so you

should be careful when you load
a container filled with liquid into
the trunk.

• For your safety, use the authentic-

ity by approved authorized
HYUNDAI dealer,

when you

replace the battery.

Summary of Contents for 2010 Genesis
















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands