Hyundai 2010 Genesis Owner'S Manual Download Page 305

Page: 305 / 399

What to do in an emergency

4. Remove the wheel lug nut wrench,

jack, jack handle, and spare tire
from the vehicle.

5. Block both the front and rear of the

wheel that is diagonally opposite
the jack position.

6. Insert the screwdriver into the

groove of the wheel cap and pry
gently to remove the wheel cap (If
equipped).

OBH068009

OBH068024L

WARNING

- Changing a tire

• To prevent vehicle movement

while changing a tire, always
set the parking brake fully,
and always block the wheel
diagonally opposite the wheel
being changed.

• We recommend that the

wheels of the vehicle be
blocked, and that no person
remain in a vehicle that is
being jacked.

Summary of Contents for 2010 Genesis
















































































































































































































































































































































































































Search results

Summary of Contents for 2010 Genesis

Reviews:

Brands by name

Popular brands

Hyundai 2010 Genesis, Owner'S Manual

Search results

Summary of Contents for 2010 Genesis

Reviews:

Brands by name

Popular brands