manualshive.com logo in svg

Hyundai 2010 Genesis, Owner'S Manual

Share
Download
Hyundai 2010 Genesis Owner'S Manual Download Page 167

Features of your vehicle

90

4

Adjusting the driver and passenger side
temperature individually 

1. Press the DUAL button to operate the

driver and passenger side temperature
individually. Pressing the right temper-
ature control button will automatically
switch to the DUAL mode as well.

2. Press the left temperature control to

adjust the driver side temperature.
Press the right temperature control to
adjust the passenger side tempera-
ture.

When the driver side temperature is set
to the highest (HI) or lowest (Lo) temper-
ature setting, the DUAL mode is deacti-
vated for maximum heating or cooling.

Adjusting the driver and passenger side
temperature equally

1. Press the DUAL button again to deac-

tivate DUAL mode. The passenger
side temperature will be set to the
same temperature as the driver side
temperature.

2. Press the left temperature control but-

ton. The driver and passenger side
temperature will be adjusted equally.

Temperature conversion

If the battery has been discharged or dis-
connected, the temperature mode dis-
play will reset to Fahrenheit.
This is a normal condition.You can switch
the temperature mode between
Fahrenheit to Centigrade as follows;
While pressing the MODE button,
depress the DUAL button for 3 seconds
or more. The display will change from
Fahrenheit to Centigrade, or from
Centigrade to Fahrenheit.

D240203AEN

Air intake control

This is used to select the outside (fresh)
air position or recirculated air position.
To change the air intake control position,
push the control button.

OBH048097N

OBH048098

Summary of Contents for 2010 Genesis
















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands