manualshive.com logo in svg

Hyundai 2010 Genesis, Owner'S Manual

Share
Download
Hyundai 2010 Genesis Owner'S Manual Download Page 180

4 103

Features of your vehicle

D280300ABH-EU

Cup holder

Cups or small beverage cans may be
placed in the cup holders.

Front

To open the cover, press the cover and it
will slowly open.

Rear

To open the cover, pull the cover.

D280400BBH

Sunvisor

Use the sunvisor to shield direct light
through the front or side windows.
To use a sunvisor, pull it downward.
To use a sunvisor for a side window, pull
it downward, unsnap it from the bracket
(1) and swing it to the side (2).

WARNING

- 

Hot liquids

• Do not place uncovered cups of

hot liquid in the cup holder while
the vehicle is in motion. If the hot
liquid spills, you could be burned.
Such a burn to the driver could
lead to loss of control of the vehi-
cle.

• To reduce the risk of personal

injury in the event of sudden stop
or collision, do not place uncov-
ered or unsecured bottles, glass-
es, cans, etc., in the cup holder
while the vehicle is in motion.

OBH048117

OBH038018N

Rear

Front

OBH048118

HTG2174

Summary of Contents for 2010 Genesis
















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands