manualshive.com logo in svg

Hyundai 2009 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2009 Santa Fe Owner'S Manual Download Page 99

1

FEATURES OF YOUR HYUNDAI

88

OCM052132

B450B01NF-GAT

Rear Drink Holder

The rear drink holder for holding cups or
cans is located in the center of the rear seat
armrest.

OCM052131

DRINK HOLDER

B450A01CM-AAT

Front Drink Holder

The front drink holder is located on the
main console.

!

WARNING:

The AC Inverter can be dangerous! When
using the AC Inverter, carefully observe
the following precautions to avoid seri-
ous injuries.
o Do not use heated electric products

(coffeepot, toaster, heater, iron, etc.).

o Do not insert a foreign objects into or

touch the AC Inverter; you may get
shocked.

o Do not let children operate or touch

the AC Inverter.

o When not using the AC Inverter, close

the cover.

Summary of Contents for 2009 Santa Fe


































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands