manualshive.com logo in svg

Hyundai 2009 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2009 Santa Fe Owner'S Manual Download Page 311

6

DO-IT-YOURSELF MAINTENANCE

26

!

WARNING:

This halogen bulb contains gas under
pressure and if impacted could shatter,
resulting in flying fragments. Always
wear eye protection when servicing the
bulb. Protect the bulb against abrasions
or scratches and against liquids when
lighted. Turn the bulb on only when in-
stalling in a headlight. Replace the head-
light if damaged or cracked. Keep the
bulb out of the reach of children and
dispose of the used bulb with care.

G270A03O

G270K01CM-GAT

Front Fog Light (If Installed)

NOTE:

It is recommended that the front fog light
bulb be replaced by an authorized
Hyundai dealer.

OCM055014L

12. To replace the front turn signal light

bulb or the front position light bulb, take
it out from the bulb holder and install
the new bulb.

Summary of Contents for 2009 Santa Fe


































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands