manualshive.com logo in svg

Hyundai 2009 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2009 Santa Fe Owner'S Manual Download Page 124

1

FEATURES OF YOUR HYUNDAI

113

!

WARNING:

OCM052014

REMOTE FUEL-FILLER LID
RELEASE

B560A01CM-AAT

The fuel-filler lid may be opened from
inside the vehicle by pulling up on the fuel-
filler lid opener located on the driver's
door.

NOTE:

If the fuel-filler lid will not open because
ice has formed around it, tap lightly or
push on the lid to break the ice and
release the lid. Do not pry on the lid. If
necessary, spray around the lid with an
approved de-icer fluid (do not use radia-
tor anti-freeze) or move the vehicle to a
warm place and allow the ice to melt.

OCM052015

!

WARNING:

o Gasoline vapors are dangerous.  Be-

fore refueling, always stop the engine
and never smoke or allow sparks and
open flames near the filler area.

o Never operate your vehicle without a

filler cap properly installed, flammable
vapors and gasoline could leak out in
dangerous situations such as a colli-
sion or rollover.  If the filler cap must
be replaced, only use genuine Hyundai
replacement parts.

o After refueling, make sure the fuel

cap is installed securely to prevent
fuel spillage in the event of an acci-
dent

o Tighten the cap until it clicks, other-

wise the "

" light will illuminate

Summary of Contents for 2009 Santa Fe


































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands