Hyundai 2009 Santa Fe, Owner'S Manual

Page: 182 / 353

1
171 171 171 171 171 171
FEATURES OF YOUR HYUNDAI
To call back a preset channel:
1. Select the band (XM1, XM2 or XM3) you
want using the XM button.
2. Press the preset button you want.
The system automatically jumps to the
preset channel. The channel informa-
tion and preset number are displayed
on the LCD screen.
5. SCAN button
Channel scan function
Press the SCAN button to scan all the
channels in XM. The audio system plays
the audio of a channel for 10 seconds
before scanning for the next channel. When
the category search is on, the channel
scan is blinded within the current category.
Otherwise, it is done across the catego-
ries.
If you want to keep listening to a particular
channel and want to stop the scanning,
press the
SCAN button again.
This function is useful for providing you
with a good overview of all the radio sta-
tions within range of your tuner.
Preset scan function
Press and hold the SCAN button for more
than 2 seconds. Each preset channel will
be automatically played for 10 seconds. If
you want to keep listening to a particular
preset channel and want to stop the scan-
ning, press the
SCAN button again.
6. INFO button
INFO button brings out the extra channel
info of the current played channel. The
audio system shows the following extra
channel info in sequence when the
INFO
is pressed several times. First, it shows the
song/program title. Then, it follows by the
name of the artist/feature. The last one is
the category name. Another press of
INFO
button brings the display back to the status
of the current played channel.
Checking RADIO ID
Every SDAR box comes with one unique
RADIO ID. You need ID to make subscrip-
tion with XM service provider. Do
single
seek to channel 0 using SEEK '
∧∧∧∧∧
' and '
∨∨∨∨∨
'
buttons. The audio system will then dis-
play the RADIO ID of the SDAR box.
Buttons not in use in tuner mode
The following buttons and functions are
not used in XM mode.
- << button
- >> button
- RPT button
- RDM button
- MARK button