manualshive.com logo in svg

Hyundai 2009 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2009 Santa Fe Owner'S Manual Download Page 310

6

DO-IT-YOURSELF MAINTENANCE

25

8. Push the bulb spring to remove the

headlight bulb.

9. Remove the protective cap from the

replacement bulb and install the new
bulb by matching the plastic base with
the headlight hole. Reattach the bulb
spring and reconnect the connector.

10. Use the protective cap and carton to

promptly dispose of the old bulb.

11. Check for proper headlight aim.

7. Disconnect the connector from the bulb

base in the back of the headlight.

OCM055011L

OCM055012L

5. Disconnect the wire harness from the

bulb base in the back of the headlight.

6. Turn the plastic cover counterclock-

wise and remove it.

OCM055010L

OCM055009L

Summary of Contents for 2009 Santa Fe


































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands