manualshive.com logo in svg

Hyundai 2009 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2009 Santa Fe Owner'S Manual Download Page 301

6

DO-IT-YOURSELF MAINTENANCE

16

4. Pull out the climate control air filter with

the hooks on both sides pressed.

OCM055011

CHANGING THE CLIMATE
CONTROL AIR FILTER

B145A01CM-AAT

(For Evaporator and Blower Unit)
(If Installed)

The climate control air filter is located in
front of the evaporator unit behind the
glove box.
It helps to decrease the amount of pollut-
ants entering the car.

1. Open the glove box and remove the

adjusting pins on both sides of the glove
box.

OCM055010

2. Pull the damper strap on the right side

of the glove box through the hole.

3. Lower down the glove box completely.

OCM055009

CAUTION:

Be careful not to press the hooks in the
opposite direction.

!

Summary of Contents for 2009 Santa Fe


































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands