Hyundai 2007 Azera Owner'S Manual Download Page 162

Page: 162 / 308

FEATURES OF YOUR HYUNDAI

148

o This equipment is designed to be used

only in a 12 volt DC battery system
with negative ground.

o This unit is made of precision parts.

Do not attempt to disassemble or ad-
just any parts.

o When driving your vehicle, be sure to

keep the volume of the unit set low
enough to allow you to hear sounds
coming from the outside.

o Do not expose this equipment (in-

cluding the speakers and tape) to
water or excessive moisture.

CAUTION:

o Do not insert anything like coins into

the player slot as damage to the unit
may occur.

o Do not place beverages close to the

audio system. The playback mecha-
nism may be damaged if you spill
them.

o Do not impact on the audio system, or

the playback mechanism could be
damaged.

Summary of Contents for 2007 Azera





















































































































































































































































































































Search results

Summary of Contents for 2007 Azera

Reviews:

Related manuals for 2007 Azera

Brands by name

Popular brands

Hyundai 2007 Azera, Owner'S Manual

Search results

Summary of Contents for 2007 Azera

Reviews:

Related manuals for 2007 Azera

Brands by name

Popular brands