background image

1

FEATURES OF YOUR HYUNDAI

87

DIGITAL CLOCK

B400A01TG-GAT

There are three control buttons for the
digital clock. Their functions are:

H

- Push "H" to advance the hour indi-

cated.

M

- Push "M" to advance the minute indi-

cated.

R

- Push "R" to reset minutes to ":00" to

facilitate resetting the clock to the
correct time. When this is done:
Pressing "R" between 11 : 01 and 11
: 29 changes the readout to 11 : 00.
Pressing "R" between 11 : 30 and 11
: 59 changes the readout to 12 : 00.
Push the "R" button for 4 seconds to
display a 12 or 24-hour clock.

B400A01TG-A

INSTRUMENT PANEL LIGHT
CONTROL (RHEOSTAT)

B410A01A-AAT

The instrument panel lights can be made
brighter or dimmer by turning the instru-
ment panel light control knob.

B410A01TG-A

CIGARETTE LIGHTER

B420A03A-AAT

For the cigarette lighter to work, the key
must be in the "ACC" position or the "ON"
position.
To use the cigarette lighter, push it all the
way into its socket. When the element has
heated, the lighter will pop out to the "ready"
position.
Do not hold the cigarette lighter pressed in.
This can damage the heating element and
create a fire hazard.
If  it is necessary to replace the cigarette
lighter, use only a genuine Hyundai re-
placement or its approved equivalent.

B420A01TG

Summary of Contents for 2007 Azera





















































































































































































































































































































Reviews: