manualshive.com logo in svg

Hyundai 2007 Azera, Owner'S Manual, Page: 131 / 308

Share
Download
Hyundai 2007 Azera Owner'S Manual Download Page 131

1

FEATURES OF YOUR HYUNDAI

117

REAR WINDOW CURTAIN

B265C01TG

B265C01TG-AAT

(If Installed)

Press the curtain switch to raise the rear
window curtain. To lower the rear window
curtain, press the switch once again.

NOTE:

o When the transaxle gear is shifted

into reverse "R", the rear window
curtain will automatically lower. When
the transaxle gear is shifted from "R"
to "P" again or if the vehicle speed
exceeds 12 mph, the rear window
curtain will automatically raise.

o Do not attempt to raise or lower the

rear window curtain manually.

STEERING WHEEL TILT &
TELESCOPIC

B600A01TG-GAT

Manual type

To adjust the steering wheel:

1. Push the lever downward fully to un-

lock.

2. Adjust upward or downward and for-

ward or backward to set the steering
wheel to the desired position.

3. After adjustment, securely tighten the

lever by pulling it upward.

HTG2076

!

!

CAUTION:

After adjusting the steering wheel, try
moving it up and down to make sure it is
locked in position.

WARNING:

Do not attempt to adjust the steering
wheel while driving as this may result in
loss of control of the vehicle and serious
injury or death.

Summary of Contents for 2007 Azera





















































































































































































































































































































Reviews:

No comments