manualshive.com logo in svg

Hyundai 2007 Azera, Owner'S Manual

The Hyundai 2007 Azera Owner's Manual is your comprehensive guide to understanding and maintaining this elegant sedan. Discover detailed instructions, troubleshooting tips, and important safety information to keep your vehicle running smoothly. Download your free manual from manualshive.com, and unlock all the knowledge you need for a seamless driving experience.

Share
Download
background image

8

CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS

9

Vehicle Capacity Weight:

 The number

of designated seating positions multi-
plied by 150 lbs. (68 kg) plus the rated
cargo and luggage load.

Vehicle Maximum Load on the Tire:

Load on an individual tire due to curb
and accessory weight plus maximum
occupant and cargo weight.

Vehicle Normal Load on the Tire:

That load on an individual tire that is
determined by distributing to each axle
its share of the curb weight, accessory
weight, and normal occupant weight
and dividing by 2.

Vehicle Placard:

 A label permanently

attached to a vehicle showing the origi-
nal equipment tire size and recom-
mended inflation pressure.

I040B01JM-AAT

ALL SEASON TIRES

Hyundai specifies all season tires on
some models to provide good perfor-
mance for use all year round, including
snowy and icy road conditions. All sea-
son tires are identified by ALL SEASON
and/or M+S (Mud and Snow) on the tire
sidewall. Snow tires have better snow
traction than all season tires an may be
more appropriate in some areas.

I040A01O-AAT

SNOW TIRES

If you equip your car with snow tires,
they should be the same size and have
the same load capacity as the original
tires. Snow tires should be installed on
all four wheels; otherwise, poor han-
dling may result.
Snow tires should carry 4 psi (28 kPa)
more air pressure than the pressure
recommended for the standard tires on
the tire label on the driver's side of the
center pillar , or up to the maximum
pressure shown on the tire sidewall,
whichever is less.
Do not drive faster than 75 mph (120
km/h) when your car is equipped with
snow tires.

Summary of Contents for 2007 Azera





















































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Azera

LAMBORGHINI URUS Quick Manual preview
URUS
Brand: LAMBORGHINI Pages: 48
Oldsmobile 2004 Alero Quick Manual preview
2004 Alero
Brand: Oldsmobile Pages: 2
Thule PORTAGE 819 Instructions Manual preview
PORTAGE 819
Brand: Thule Pages: 12
Toyota SUPRA 1987 Electrical Wiring Diagram preview
SUPRA 1987
Brand: Toyota Pages: 165
DEFA MultiCharger 1204 User'S Installation Manual preview
MultiCharger 1204
Brand: DEFA Pages: 28
Steelmate PTS800V7 User Manual preview
PTS800V7
Brand: Steelmate Pages: 14
Whelen Engineering Company LED Dominator TAM83S2 Installation Manual preview
LED Dominator TAM83S2
Brand: Whelen Engineering Company Pages: 2
PUTCO 1951 Series Instruction Manual preview
1951 Series
Brand: PUTCO Pages: 3
Acura TSX 2014 Advanced Technology Manual preview
TSX 2014
Brand: Acura Pages: 19
Ford 2009 Edge Owner'S Manual preview
2009 Edge
Brand: Ford Pages: 325
Prime Design FEA-0004 Assembly Instructions Manual preview
FEA-0004
Brand: Prime Design Pages: 12
Bulldog Security BulldogOne BD1 User Manual preview
BulldogOne BD1
Brand: Bulldog Security Pages: 7
ECS Electronics CT-050-B1 Fitting Instructions Manual preview
CT-050-B1
Brand: ECS Electronics Pages: 42
Metra Electronics 99-8206 Installation Instructions Manual preview
99-8206
Brand: Metra Electronics Pages: 12
SMART cabriolet Maintenance Booklet preview
cabriolet
Brand: SMART Pages: 26
Perrycraft DynaSport Roof Rack Installation Instructions preview
DynaSport Roof Rack
Brand: Perrycraft Pages: 4
Toyota 2003 Prius Manual preview
2003 Prius
Brand: Toyota Pages: 307
ETC CarPlay NV17 Manual preview
CarPlay NV17
Brand: ETC Pages: 11

Brands by name

Popular brands

Load more brands