manualshive.com logo in svg

Hyundai 2007 Azera, Owner'S Manual

The Hyundai 2007 Azera Owner's Manual is your comprehensive guide to understanding and maintaining this elegant sedan. Discover detailed instructions, troubleshooting tips, and important safety information to keep your vehicle running smoothly. Download your free manual from manualshive.com, and unlock all the knowledge you need for a seamless driving experience.

Share
Download
background image

2

DRIVING YOUR HYUNDAI

20

C190B01S-AAT

Trailer Hitches

Select the proper hitch and ball combina-
tion, making sure that its location is com-
patible with that of the trailer or vehicle
being towed.
Use a quality non-equalizing hitch which
distributes the tongue load uniformly
throughout the chassis.

The hitch should be bolted securely to the
car and installed by a qualified technician.
DO NOT USE A HITCH DESIGNED FOR
TEMPORARY INSTALLATION AND
NEVER USE ONE THAT ATTACHES
ONLY TO THE BUMPER.

TRAILER OR VEHICLE TOW-
ING

!

C190A01TG-AAT

If you are considering towing with your car,
you should first check with your State's
Department of Motor Vehicles to deter-
mine their legal requirements.
Since laws vary from State to State the
requirements for towing trailers, cars, or
other types of vehicles or apparatus may
differ. Ask your Hyundai dealer for further
details before towing.

CAUTION:

o Do not do any towing with your car

during its first 1,200 miles (2,000 km)
in order to allow the engine to properly
break in. Failure to heed this caution
may result in serious engine or
transaxle damage.

o When towing a trailer, be sure to con-

sult your Hyundai dealer for further
information on additional require-
ments such as a towing kit, etc.

C190C01Y-AAT

Trailer Brakes

If your trailer is equipped with a braking
system, make sure it conforms to federal
and/or local regulations and that it is prop-
erly installed and operating correctly.

NOTE:

If you tow a trailer or vehicle, your car will
require more frequent maintenance due
to the additional load. See Maintenance
Under Severe Usage Conditions" on
page 5-6.

CAUTION:

o Never connect a trailer brake system

directly to the vehicle brake system.

o When towing a trailer on steep grades

(in excess of 6%) pay close attention
to the engine coolant temperature
gauge to ensure the engine does not
overheat. If the needle of the coolant
temperature gauge moves across the
dial towards "H" (HOT), pull over and
stop as soon as it is safe to do so, and
allow the engine to idle until it cools
down. You may proceed once the
engine has cooled sufficiently.

!

Summary of Contents for 2007 Azera





















































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Azera

Davis Instruments 8127 Installation Instructions Manual preview
8127
Brand: Davis Instruments Pages: 16
TATA Motors Nano Owner'S Manual & Service Book preview
Nano
Brand: TATA Motors Pages: 94
GÄN GA Manual preview
GA
Brand: GÄN Pages: 24
Ecco Gemineye EC2014-C Installation Instructions Manual preview
Gemineye EC2014-C
Brand: Ecco Pages: 10
Ecco Reflex 5500 Series Installation And Operating Instructions Manual preview
Reflex 5500 Series
Brand: Ecco Pages: 12
Yakima K618 Instructions Manual preview
K618
Brand: Yakima Pages: 11
Vaisala MD30 Setup Manual preview
MD30
Brand: Vaisala Pages: 24
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
Caraudio-Systems v.LOGiC Intelligent Solution V5-NTG46 Manual preview
v.LOGiC Intelligent Solution V5-NTG46
Brand: Caraudio-Systems Pages: 18
Tellur BASIC TLL171231 User Manual preview
BASIC TLL171231
Brand: Tellur Pages: 5
Dodge 2005 JR41 Stratus Owner'S Manual preview
2005 JR41 Stratus
Brand: Dodge Pages: 293
ULTIMATE SPEED 279619 Instructions For Use And Safety Manuallines preview
279619
Brand: ULTIMATE SPEED Pages: 40
TATA Motors Indigo eCS Owner'S Manual & Service Book preview
Indigo eCS
Brand: TATA Motors Pages: 166
Advanced Diagnostics MVP PRO Manual preview
MVP PRO
Brand: Advanced Diagnostics Pages: 10
Kia CADENZA 2017 Features & Functions Manual preview
CADENZA 2017
Brand: Kia Pages: 58
Belkin F8J034 User Manual preview
F8J034
Brand: Belkin Pages: 30
Mitsubishi FTO Series Handbook preview
FTO Series
Brand: Mitsubishi Pages: 141

Brands by name

Popular brands

Load more brands