manualshive.com logo in svg

Hyundai 2005 Sonata, Owner'S Manual

Get your copy of the Hyundai 2005 Sonata Owner's Manual today! This comprehensive manual is a must-have for all Sonata owners. Download it for free from manualshive.com, and gain instant access to important information, troubleshooting tips, and maintenance instructions to keep your Sonata running smoothly.

Share
Download
background image

6

DO-IT-YOURSELF MAINTENANCE

26

2. Open the fuse box and examine each fuse.

Remove each fuse by pulling it toward you
(a small "fuse puller" tool is contained in the
relay and fuse box of the engine room to
simplify this operation).

3. Be sure to check all other fuses even if you

G200B02NF

find one that appears to have burned out.

4. Replace the blown fuse by pressing a new

fuse of the same rating into place. The fuse
should be a snug fit. If it is not, have the fuse
clip repaired or replaced by a Hyundai dealer.
If you do not have a spare fuse, you may be
able to borrow a fuse of the same or lower
rating from an accessory you can tempo-
rarily get along without (the radio or cigarette
lighter, for example). Always remember to
replace the borrowed fuse.

!

G200B02L

Good

Burned out

CAUTION:

A burned-out fuse indicates that there is a
problem in the electrical circuit. If you re-
place a fuse and it blows as soon as the
accessory is turned on, the problem is
serious and should be referred to a Hyundai
dealer for diagnosis and repair. Never re-
place a fuse with anything except a fuse
with the same or a lower amperage rating.
A higher capacity fuse could cause damage
and create a fire hazard.

NOTE:

See page 6-39 for the fuse panel descrip-
tions.

G200B01NF-GAT

Replacing Accessory Fuse

G200B01NF-A

The fuse box for the lights and other electrical
accessories will be found on the left side of the
instrument panel. Inside the box you will find a
list showing the circuits protected by each fuse.
If any of your car's lights or other electrical
accessories stop working, a blown fuse could
be the reason. If the fuse has burned out, you
will see that the metal strip inside the fuse has
burned through. If you suspect a blown fuse,
follow this procedure:
1. Turn off the ignition and all other switches.

Summary of Contents for 2005 Sonata
















































































































































































































































































Reviews:

No comments

Related manuals for 2005 Sonata

B-Speech B-Speech Prim Manual preview
B-Speech Prim
Brand: B-Speech Pages: 18
Carefree Slideout Cover Service Manual preview
Slideout Cover
Brand: Carefree Pages: 12
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
Dometic GROUP DRS2 Installation And Operating Manual preview
DRS2
Brand: Dometic GROUP Pages: 20
TrailFX A4012S Installation Instructions Manual preview
A4012S
Brand: TrailFX Pages: 6
Jeep Cherokee 2000 Service Manual preview
Cherokee 2000
Brand: Jeep Pages: 1528
Toro 137-1019 Installation Instructions Manual preview
137-1019
Brand: Toro Pages: 24
EUFAB 16465 Operating Instructions Manual preview
16465
Brand: EUFAB Pages: 12
Quadratec 12057.0263 Installation Manual preview
12057.0263
Brand: Quadratec Pages: 12
Yakima K614 Manual preview
K614
Brand: Yakima Pages: 12
FALCON RIDGE CF-1000-WD05 Instructions For Installation And Care preview
CF-1000-WD05
Brand: FALCON RIDGE Pages: 6
Lantronix FOX3 Series Hardware Manual preview
FOX3 Series
Brand: Lantronix Pages: 51
ORA XL MIRROR Installation Instructions Manual preview
XL MIRROR
Brand: ORA Pages: 7
Belkin TuneBase F8Z442 User Manual preview
TuneBase F8Z442
Brand: Belkin Pages: 162
Roadefend RDT401P Instruction Book preview
RDT401P
Brand: Roadefend Pages: 15
Alfa Romeo Stelvio 2019 User Manual preview
Stelvio 2019
Brand: Alfa Romeo Pages: 268
Yakima K1095 Instructions Manual preview
K1095
Brand: Yakima Pages: 12

Brands by name

Popular brands

Load more brands