manualshive.com logo in svg

Hyundai 2005 Sonata, Owner'S Manual

Get your copy of the Hyundai 2005 Sonata Owner's Manual today! This comprehensive manual is a must-have for all Sonata owners. Download it for free from manualshive.com, and gain instant access to important information, troubleshooting tips, and maintenance instructions to keep your Sonata running smoothly.

Share
Download
background image

2

DRIVING YOUR HYUNDAI

19

C190B01S-AAT

Trailer Hitches

Select the proper hitch and ball combination,
making sure that its location is compatible with
that of the trailer or vehicle being towed.
Use a quality non-equalizing hitch which distrib-
utes the tongue load uniformly throughout the
chassis.

The hitch should be bolted securely to the car
and installed by a qualified technician. DO NOT
USE A HITCH DESIGNED FOR TEMPORARY
INSTALLATION AND NEVER USE ONE THAT
ATTACHES ONLY TO THE BUMPER.

C190C01Y-AAT

Trailer Brakes

If your trailer is equipped with a braking system,
make sure it conforms to federal and/or local
regulations and that it is properly installed and
operating correctly.

NOTE:

If you tow a trailer or vehicle, your car will
require more frequent maintenance due to
the additional load. See Maintenance Under
Severe Usage Conditions" on page 5-6.

TRAILER OR VEHICLE TOWING

!

C190A01S-AAT

If you are considering towing with your car, you
should first check with your State's Department
of Motor Vehicles to determine their legal re-
quirements.
Since laws vary from State to State the require-
ments for towing trailers, cars, or other types of
vehicles or apparatus may differ. Ask your
Hyundai dealer for further details before towing.

CAUTION:

Do not do any towing with your car during
its first 1,200 miles (2,000 km) in order to
allow the engine to properly break in. Fail-
ure to heed this caution may result in seri-
ous engine or transaxle damage.

USE OF LIGHTS

C180A01A-AAT

Check your lights regularly for correct opera-
tion and always keep them clean. When driving
during the day in conditions of poor visibility, it
is helpful to drive with headlights on low beam.
This enables you to be seen as well as to see.

Summary of Contents for 2005 Sonata
















































































































































































































































































Reviews:

No comments

Related manuals for 2005 Sonata

Haibang HA998 Series Installation Instructions Manual preview
HA998 Series
Brand: Haibang Pages: 6
Jeep GLADIATOR 2022 Owner'S Manual preview
GLADIATOR 2022
Brand: Jeep Pages: 380
Pet Gear TRI-FOLD PG9300RF Instruction Manual preview
TRI-FOLD PG9300RF
Brand: Pet Gear Pages: 4
Thetford SANICON TURBO 300 Operating Instructions Manual preview
SANICON TURBO 300
Brand: Thetford Pages: 25
walser ULTIMATE SPEED 296713 Assembly And Safety Advice preview
ULTIMATE SPEED 296713
Brand: walser Pages: 10
Mercedes-Benz 2009 E-Class Manual preview
2009 E-Class
Brand: Mercedes-Benz Pages: 373
VP Autoparts 419420 Installation preview
419420
Brand: VP Autoparts Pages: 2
ICON 58990 Owner'S Manual & Safety Instructions preview
58990
Brand: ICON Pages: 4
FEATHERLITE TRAILERS COACH TRAILERS Owner'S Manual preview
COACH TRAILERS
Brand: FEATHERLITE TRAILERS Pages: 60
TERAFLEX 1365000 Manual preview
1365000
Brand: TERAFLEX Pages: 18
Curt Group Retrac 207700 Installation Manual preview
Retrac 207700
Brand: Curt Group Pages: 4
Cadillac ESCALADE EXT - DATASHEET 2011 Datasheet preview
ESCALADE EXT - DATASHEET 2011
Brand: Cadillac Pages: 1
AdvanceTec AT6538A Installation Manual preview
AT6538A
Brand: AdvanceTec Pages: 8
AdvanceTec Hands free User Manual preview
Hands free
Brand: AdvanceTec Pages: 12
AdvanceTec AT6701A User Manual preview
AT6701A
Brand: AdvanceTec Pages: 12
Toyota PZ434-T9790-1C Manual preview
PZ434-T9790-1C
Brand: Toyota Pages: 4
Toyota PZ408-B2691-00 Installation Instructions Manual preview
PZ408-B2691-00
Brand: Toyota Pages: 29
Toyota PW5D0-0K001 Installation Instructions Manual preview
PW5D0-0K001
Brand: Toyota Pages: 36

Brands by name

Popular brands

Load more brands