manualshive.com logo in svg

Hyundai 2005 Sonata, Owner'S Manual

Get your copy of the Hyundai 2005 Sonata Owner's Manual today! This comprehensive manual is a must-have for all Sonata owners. Download it for free from manualshive.com, and gain instant access to important information, troubleshooting tips, and maintenance instructions to keep your Sonata running smoothly.

Share
Download
background image

2

DRIVING YOUR HYUNDAI

25

!

WARNING:

o Overloading your vehicle can

cause heat buildup in your
vehicle's tires and possible tire
failure that could lead to a crash.

o Overloading your vehicle can

cause increased stopping dis-
tances that could lead to a crash.

o A crash resulting from poor han-

dling vehicle damage, tire failure,
or increased    stopping distances
could result in serious injury or
death.

!

This label also tells you the maximum
weights that can be supported by the
front and rear axles, called Gross Axle
Weight Rating (GAWR). To find out the
actual loads on your front and rear
axles, you need to go to a weigh station
and weigh your vehicle. Your dealer can
help you with this. Be sure to spread out
your load equally on the left and right
sides of the centerline.

WARNING:

o Never exceed the GVWR for your

vehicle or the GAWR for either the
front or rear axle.

o Do not load your vehicle any

heavier than the GVWR or either
the maximum front or rear GAWR.
If you do, parts on your vehicle
can break, and it can change the
way your vehicle handles. This
could cause you to lose control
and crash. Also, overloading can
shorten the life of your vehicle.

C190G02JM-AAT

Compliance Label

The compliance label is located on the
driver's side of the center pillar outer
panel.

The label shows the size of your original
tires and the inflation pressures needed
to obtain the gross weight capacity of
your vehicle. This is called the GVWR
(Gross Vehicle Weight Rating). The
GVWR includes the weight of the ve-
hicle, all occupants, fuel and cargo.

C190G01JM

Summary of Contents for 2005 Sonata
















































































































































































































































































Reviews:

No comments

Related manuals for 2005 Sonata

Davis Instruments 8127 Installation Instructions Manual preview
8127
Brand: Davis Instruments Pages: 16
Yakima Whispbar K887W Fitting Instructions Manual preview
Whispbar K887W
Brand: Yakima Pages: 19
Nav TV UCI-11C NTV-KIT331 User Manual preview
UCI-11C NTV-KIT331
Brand: Nav TV Pages: 4
Renault 2016 Sandero Stepway Handbook preview
2016 Sandero Stepway
Brand: Renault Pages: 183
Saleen 10-8002-C11670C Manual preview
10-8002-C11670C
Brand: Saleen Pages: 17
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
Fiat Fiat Bravo LPG Owner'S Manual preview
Fiat Bravo LPG
Brand: Fiat Pages: 24
Valeo AS1A Owner'S Manual preview
AS1A
Brand: Valeo Pages: 28
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
Subaru 1994 Impreza Supplemental Service Manual preview
1994 Impreza
Brand: Subaru Pages: 540
Kia Bluetooth Phone System 2010 Reference Manual preview
Bluetooth Phone System 2010
Brand: Kia Pages: 16
iQOS CCU01 Safety Warnings And Instructions preview
CCU01
Brand: iQOS Pages: 4
Dhollandia DH-RB 05.02 Series User Manual preview
DH-RB 05.02 Series
Brand: Dhollandia Pages: 65
Curt Group Aries AL235045 Installation Manual preview
Aries AL235045
Brand: Curt Group Pages: 2
Mazda 2011 CX-9 Owner'S Manual preview
2011 CX-9
Brand: Mazda Pages: 605
Safe Fleet RVS-218629 Instruction Manual preview
RVS-218629
Brand: Safe Fleet Pages: 28
Honda Vezel Owner'S Manual preview
Vezel
Brand: Honda Pages: 279
Safe Fleet PRIME DESIGN UXV 211 Quick Start Manual preview
PRIME DESIGN UXV 211
Brand: Safe Fleet Pages: 8

Brands by name

Popular brands

Load more brands