manualshive.com logo in svg

Hyundai 2005 Sonata, Owner'S Manual

Get your copy of the Hyundai 2005 Sonata Owner's Manual today! This comprehensive manual is a must-have for all Sonata owners. Download it for free from manualshive.com, and gain instant access to important information, troubleshooting tips, and maintenance instructions to keep your Sonata running smoothly.

Share
Download
background image

6

DO-IT-YOURSELF MAINTENANCE

21

G140C01A-AAT

Lubrication

To lubricate the compressor and the seals in the
system, the air conditioning should be run for at
least 10 minutes each week. This is particularly
important during cool weather when the air
conditioning system is not otherwise in use.

!

G120E02A-AAT

Adding Brake Fluid

WARNING:

Handle brake fluid carefully. It can damage
your vision if it gets into your eyes. Use only
DOT 3 or DOT 4 specification fluid from a
sealed container. Do not allow the fluid can
or reservoir to remain open any longer than
required. This will prevent entry of dirt and
moisture which can damage the brake sys-
tem and cause improper operation.

To add brake fluid, first wipe away any dirt then
unscrew the fluid reservoir cap. Slowly pour the
recommended fluid into the reservoir. Do not
overfill. Carefully replace the cap on the reser-
voir and tighten.

AIR CONDITIONING CARE

!

G140A01A-AAT

Keeping the Condenser Clean

The air conditioning condenser (and engine
radiator) should be checked periodically for
accumulation of dirt, dead insects, leaves, etc.
These can interfere with maximum cooling ef-
ficiency. When removing such accumulations,
brush or hose them away carefully to avoid
bending the cooling fans.

G140B01A-AAT

Checking the Air Conditioning Opera-
tion

1. Start the engine and let it run at a fast idle for

several minutes with the air conditioning set
at the maximum cold setting.

2. If the air coming out of the in-dash vents is

not cold, have the air conditioning system
inspected by your Hyundai dealer.

CAUTION:

Running the air conditioning system for
extended periods of time with a low refrig-
erant level may damage the compressor.

HNF5013

Summary of Contents for 2005 Sonata
















































































































































































































































































Reviews:

No comments

Related manuals for 2005 Sonata

Jabra SP200 - QUICKSTART GUIDE 1 Quick Start Manual preview
SP200 - QUICKSTART GUIDE 1
Brand: Jabra Pages: 2
Jabra BT150 - Headset - Over-the-ear Quick Start Manual preview
BT150 - Headset - Over-the-ear
Brand: Jabra Pages: 2
Triumph MAYFLOWER 1951 Instruction Book preview
MAYFLOWER 1951
Brand: Triumph Pages: 86
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
Skoda Fabia Combi 5J Fitting Instructions preview
Fabia Combi 5J
Brand: Skoda Pages: 2
Saab 32000574 Installation Instructions Manual preview
32000574
Brand: Saab Pages: 9
Skoda FABIA II TMB PS 035 Mounting And User Instructions preview
FABIA II TMB PS 035
Brand: Skoda Pages: 16
Tactik Tube Doors Installation & Use Instructions preview
Tube Doors
Brand: Tactik Pages: 4
banks 61410 Owner'S Manual preview
61410
Brand: banks Pages: 76
Mazda Auto-Dimming Mirror User Manual preview
Auto-Dimming Mirror
Brand: Mazda Pages: 2
NavLinkz RL4-MIB3-E Manual preview
RL4-MIB3-E
Brand: NavLinkz Pages: 24
BENDIX C-5 CUT OUT COCK Manual preview
C-5 CUT OUT COCK
Brand: BENDIX Pages: 2
Yakima MegaWarrior Instruction Manual preview
MegaWarrior
Brand: Yakima Pages: 8
GMC ACADIA 2017 Getting To Know Your preview
ACADIA 2017
Brand: GMC Pages: 20
Diono easy view XXL Instructions Manual preview
easy view XXL
Brand: Diono Pages: 9
SAN HIMA ROOF-RACK-T User Manual preview
ROOF-RACK-T
Brand: SAN HIMA Pages: 8

Brands by name

Popular brands

Load more brands