Hyundai 2002 Santa Fe Owner'S Manual Download Page 121 | Manualshive

Page: 121 / 169

background image

WHAT TO DO IN AN EMERGENCY

WHAT TO DO IN AN EMERGENCY

WHAT TO DO IN AN EMERGENCY

WHAT TO DO IN AN EMERGENCY

WHAT TO DO IN AN EMERGENCY

3-9

D080D02O-AAT

Emergency Towing

Emergency Towing

Emergency Towing

Emergency Towing

Emergency Towing

D080D01O

For emergency towing when no commercial
tow vehicle is available, attach a tow cable,
chain or strap to one of the tie-down hooks
under the front of your car. Be very careful
when attempting this procedure when the ve-
hicle is on any unpaved surface to avoid dam-
age to your vehicle.
Nor should towing be attempted if the wheels,
drive train, axles, steering or brakes are dam-
aged. Before towing, be sure the transaxle is in
neutral and the key is in "ACC" (with the engine
off) or in the "ON" position (with the engine
running). A driver must be in the towed car to
steer it and operate the brakes.

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

To avoid serious damage to your 4WD ve-

To avoid serious damage to your 4WD ve-

To avoid serious damage to your 4WD ve-

To avoid serious damage to your 4WD ve-

To avoid serious damage to your 4WD ve-
hicle, limit the towing to 10 mph and not for

hicle, limit the towing to 10 mph and not for

hicle, limit the towing to 10 mph and not for

hicle, limit the towing to 10 mph and not for

hicle, limit the towing to 10 mph and not for
more than 1 mile at ANY TIME.

more than 1 mile at ANY TIME.

more than 1 mile at ANY TIME.

more than 1 mile at ANY TIME.

more than 1 mile at ANY TIME.

D120A01A-AAT

IF YOU LOSE YOUR KEYS

IF YOU LOSE YOUR KEYS

IF YOU LOSE YOUR KEYS

IF YOU LOSE YOUR KEYS

IF YOU LOSE YOUR KEYS

If you lose your keys, many Hyundai dealers
can make you a new key if you have your key
number.
If you lock the keys inside your car and you
cannot obtain a new key, many Hyundai deal-
ers can use special tools to open the door for
you.

CAUTION:

CAUTION:

CAUTION:

CAUTION:

CAUTION:

If the car is being towed with all four wheels

If the car is being towed with all four wheels

If the car is being towed with all four wheels

If the car is being towed with all four wheels

If the car is being towed with all four wheels
on the ground, it can be towed only from the

on the ground, it can be towed only from the

on the ground, it can be towed only from the

on the ground, it can be towed only from the

on the ground, it can be towed only from the
front. Be sure that the transaxle is in neutral.

front. Be sure that the transaxle is in neutral.

front. Be sure that the transaxle is in neutral.

front. Be sure that the transaxle is in neutral.

front. Be sure that the transaxle is in neutral.
Do not tow at speeds greater than 30 mph

Do not tow at speeds greater than 30 mph

Do not tow at speeds greater than 30 mph

Do not tow at speeds greater than 30 mph

Do not tow at speeds greater than 30 mph
(50 km/h) and for more than 15 miles (25

(50 km/h) and for more than 15 miles (25

(50 km/h) and for more than 15 miles (25

(50 km/h) and for more than 15 miles (25

(50 km/h) and for more than 15 miles (25
km). Be sure the steering is unlocked by

km). Be sure the steering is unlocked by

km). Be sure the steering is unlocked by

km). Be sure the steering is unlocked by

km). Be sure the steering is unlocked by
placing the key in the "ACC" position.

placing the key in the "ACC" position.

placing the key in the "ACC" position.

placing the key in the "ACC" position.

placing the key in the "ACC" position.
A driver must be in the towed vehicle to

A driver must be in the towed vehicle to

A driver must be in the towed vehicle to

A driver must be in the towed vehicle to

A driver must be in the towed vehicle to
operate the steering and brakes.

operate the steering and brakes.

operate the steering and brakes.

operate the steering and brakes.

operate the steering and brakes.

«
...
119
120
121
122
123
...
»

Summary of Contents for 2002 Santa Fe










































































































































































Reviews:

No comments

Related manuals for 2002 Santa Fe

Brand: Lancia Pages: 276

Brand: T-Tech Pages: 38

Brand: Kia Pages: 419

MOLLE PANELS RAM 2500

Brand: PUTCO Pages: 4

Brand: Westfalia Pages: 18

Brand: Compass Pages: 16

Brand: PEUGEOT Pages: 249

Escalade ESV 2014

Brand: Cadillac Pages: 508

Brand: Hama Pages: 2

Brand: Prorack Pages: 10

51 47 0 027 792

Brand: BMW Pages: 7

Brand: Ford Pages: 728

Brand: Westin Pages: 5

Brand: JBL Pages: 12

Brand: INDIWORK Pages: 18

Brand: Opel Pages: 103

Brand: Cadillac Pages: 335

Brand: Maserati Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands