manualshive.com logo in svg

Hyundai 2002 Santa Fe, Owner'S Manual, Page: 52 / 169

Share
Download
Hyundai 2002 Santa Fe Owner'S Manual Download Page 52

FEATURES OF YOUR HYUNDAI

1- 43

B430A01O-AAT

FRONT ASHTRAY

B430A01O

The front ashtray may be opened by pulling it
out by its grip.
To clean the ashtray, the plastic receptacle
should be removed and lift the receptacle out.

B440A01Y-AAT

REAR ASHTRAY

B440A01O

The rear ashtray may be opened by pulling it
out by its top edge. To remove the ashtray to
empty or clean it, lift it up slightly and pull it all
the way out.

B450A01O-AAT

DRINK HOLDER

B450A01O

The drink holder is located on the main con-
sole for holding cups or cans.

WARNING:

Do not place objects other than cups or
cans in the drink holder. The objects can
be thrown out in the event of a sudden
stop or an accident, possibly injuring the
passengers in the vehicle.

The rear drink holder is located on the rear
main console for holding cups or cans. The
rear drink holder can be used by pushing and
pulling it at its top edge.

CAUTION:

Place the drink holder in its original posi-
tion while not in use.

B450B02O-AAT

REAR DRINK HOLDER (If Installed)

B450B01O

Summary of Contents for 2002 Santa Fe










































































































































































Reviews:

No comments