manualshive.com logo in svg

Hyundai 2002 Santa Fe, Owner'S Manual, Page: 58 / 169

Share
Download
Hyundai 2002 Santa Fe Owner'S Manual Download Page 58

FEATURES OF YOUR HYUNDAI

1- 49

B520C01L-GAT

HOMELINK MIRROR (If installed)

Your new vehicle becomes equipped with a
Gentex Night Vision Safety mirror. During
nighttime driving, this safety feature will auto-
matically detect and eliminate dangerous rear-
view mirror glare.

Your new mirror also comes with an inte-
grated HomeLink Universal Transceiver,
which allows you to program the mirror to
activate your garage door(s), estate gate,
home lighting, etc. The mirror actually learns
the codes from your various existing trans-
mitters.

Automatic-Dimming Function

B520C01L

B520C01L

HomeLink buttons

Indicator light

Glare detection
sensor

Automatic-dimming mirror

function buttons

To protect your vision during nighttime driv-
ing, your mirror will automatically dim upon
detecting glare from the vehicles traveling
behind you.

Press the            button to turn the automatic-
dimming function off. The mirror indicator light
will turn off.

Press the            button to turn the automatic-
dimming function on. The mirror indicator light
will illuminate.

NOTE:

The mirror defaults to the "on" position
each time the vehicle is started.

HOMELINK PROGRAMMING
CAUTION:

o Make sure people and/or objects are

out of the way of any garage doors or
gates you may be operating during the
programming procedures.

o Keep original transmitters for potential

future programming needs, or in case
you sell the vehicle.

o In the event you do sell your vehicle,

it's recommended you erase your pro-
grammed HomeLink mirror buttons.

WARNING:

Do not use HomeLink with any garage
door opener that lacks the safety stop
and reverse feature as required by federal
safety standards (includes garage doors
manufactured before April 1, 1982), as
these doors can increase the risk of seri-
ous injury or death. Call 1-800-355-3515 or
visit www.homelink.com for more infor-
mation.

Summary of Contents for 2002 Santa Fe










































































































































































Reviews:

No comments