FEATURES OF YOUR HYUNDAI
1- 12
B080F01A-AAT
Seat Cushion Height Adjustment
(If Installed) (Driver's Seat Only)
B080F01O
To raise or lower the front part of the seat
cushion, turn the front knob forward or rear-
ward. To raise or lower the rear part of the
seat cushion, turn the rear knob forward or
rearward.
B090A01Y-AAT
POWER DRIVER’S SEAT (If installed)
The driver's seat can be adjusted appropri-
ately by using the control knob on the left side
of the seat. Before driving, adjust the seat to
the proper position so as to easily control the
steering wheel, pedals and switches on the
instrument panel.
CAUTION:
Do not operate two knobs at the same
time.
B090B01Y-AAT
Adjusting Seat Forward and Rearward
B090B01O
1
2
Pull the control knob forward or backward to
move the seat forward or backward to the
desired position. Release the knob and then
the seat will remain at that position.
1. Seat Back Reclining Control Knob
2. Seat Cushion Forward, Rearward and
Height Adjusting Control Knob
WARNING:
o Never attempt to adjust the seat while
the vehicle is moving. This could result
in loss of control, and an accident caus-
ing death, serious injury, or property
damage.
o Do not sit or lean unnecessarily close
to the airbag to get better protection
during its deployment in case of an
accident.
o Do not operate the vehicle with the
headrests removed as severe injury to
an occupant may occur in the event of
an accident. Headrests may provide pro-
tection against severe neck injuries
when properly adjusted.
B080E01O-AAT
Lumbar Support Control
(Driver's seat only) (If installed)
B080E01O
To adjust the lumber support, turn the handle
on the outboard or left side of the seat. To
increase the amount of lumbar support, pull the
lever forward. To decrease it, push the lever
toward the rear.
