Hyundai 2001 Santa Fe Owner'S Manual Download Page 121 | Manualshive

Page: 121 / 151

background image

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

6-7

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

Do not clean or regap platinum-tipped spark

Do not clean or regap platinum-tipped spark

Do not clean or regap platinum-tipped spark

Do not clean or regap platinum-tipped spark

Do not clean or regap platinum-tipped spark
plugs.

plugs.

plugs.

plugs.

plugs.

G060B01O-AAT

Replacing the Spark Plugs

Replacing the Spark Plugs

Replacing the Spark Plugs

Replacing the Spark Plugs

Replacing the Spark Plugs

The spark plugs should be changed at the
intervals specified in the vehicle maintenance
schedule in Section 5 or whenever engine per-
formance indicates they should be changed.
Symptoms that suggest poor spark plug perfor-
mance include engine misfiring under load, loss
of fuel economy, poor acceleration, etc. When
spark plugs are replaced, always use spark
plugs recommended by Hyundai. The use of
other spark plugs can result in loss of perfor-
mance, radio interference or engine damage.

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

When replacing the spark plugs, always use

When replacing the spark plugs, always use

When replacing the spark plugs, always use

When replacing the spark plugs, always use

When replacing the spark plugs, always use
the genuine parts recommended.

the genuine parts recommended.

the genuine parts recommended.

the genuine parts recommended.

the genuine parts recommended.

Recommended Spark Plugs:

Recommended Spark Plugs:

Recommended Spark Plugs:

Recommended Spark Plugs:

Recommended Spark Plugs:

Type

RN10PYP4 (CHAMPION)
PGR5C-11 (NGK)

RC10PYP4 (CHAMPION)
PFR5N-11 (NGK)

Remark

For 2.4L only

For 2.7L only

G060C0IO-AAT

Changing the Spark Plugs

Changing the Spark Plugs

Changing the Spark Plugs

Changing the Spark Plugs

Changing the Spark Plugs

G060C01O

You will find it easier to change spark plugs if
the engine is cold. Always change one spark
plug at a time. This helps avoid getting the wires
mixed up.

1. Remove the center cover (2.4L) on the en-

gine rocker cover.

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

It is recommended that the spark plugs (For

It is recommended that the spark plugs (For

It is recommended that the spark plugs (For

It is recommended that the spark plugs (For

It is recommended that the spark plugs (For
Engine 2.7L) should be changed by an au-

Engine 2.7L) should be changed by an au-

Engine 2.7L) should be changed by an au-

Engine 2.7L) should be changed by an au-

Engine 2.7L) should be changed by an au-
thorized Hyundai dealer.

thorized Hyundai dealer.

thorized Hyundai dealer.

thorized Hyundai dealer.

thorized Hyundai dealer.

2. Using a clean cloth, remove any dirt that has

accumulated around the base of the spark
plug so it cannot fall into the cylinder when
the spark plug is removed.

3. To remove the spark plug cable, pull straight

up on the insulated connector, not the cable.
Pulling on the cable may damage the carbon
core conductor.

G060C02O

WARNING:

WARNING:

WARNING:

WARNING:

WARNING:

It is recommended that the engine be cool

It is recommended that the engine be cool

It is recommended that the engine be cool

It is recommended that the engine be cool

It is recommended that the engine be cool
or cold when changing

or cold when changing

or cold when changing

or cold when changing

or cold when changing the spark plugs. If

the spark plugs. If

the spark plugs. If

the spark plugs. If

the spark plugs. If

the engine is hot, you could burn yourself

the engine is hot, you could burn yourself

the engine is hot, you could burn yourself

the engine is hot, you could burn yourself

the engine is hot, you could burn yourself
on the insulated

on the insulated

on the insulated

on the insulated

on the insulated connector, the spark plug

connector, the spark plug

connector, the spark plug

connector, the spark plug

connector, the spark plug

or the engine itself.

or the engine itself.

or the engine itself.

or the engine itself.

or the engine itself.

4. When preparing to remove the old spark

plug, guide the socket down over the spark
plug, being careful not to damage the ce-
ramic insulator.

5. To remove the old spark plug, turn the

wrench handle in a counterclockwise direc-
tion.

6. To install the new spark plug, guide the

socket down over the spark plug, being
careful not to damage the ceramic insulator.

«
...
119
120
121
122
123
...
»

Summary of Contents for 2001 Santa Fe
























































































































































Reviews:

No comments

Related manuals for 2001 Santa Fe

Brand: Ecco Pages: 9

Brand: Ecco Pages: 9

Brand: TATA Motors Pages: 164

Brand: TAUBENREUTHER Pages: 8

2013 GMC Savana

Brand: GMC Pages: 398

Akerstroms Tx700

Brand: LXE Pages: 146

Brand: Oldsmobile Pages: 380

Brand: Hummer Pages: 31

Brand: Honda Pages: 22

Brand: Mercedes-Benz Pages: 494

Brand: Axxess Pages: 16

CHALLENGER GK-6125A 2018

Brand: Coolster Pages: 45

Brand: Buick Pages: 112

Auto Security AA-9103N

Brand: Audiovox Pages: 1

Turnoverball 1020

Brand: Bowers & Wilkins Pages: 6

WG Grand Cherokee 2002

Brand: Jeep Pages: 74

Brand: EZ-ON Pages: 2

MagicWatch MW150

Brand: Waeco Pages: 144

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands