FEATURES OF YOUR HYUNDAI
1- 12
B180A01A-AAT
SEAT BELT-Driver’s 3-Point System
with Emergency Locking Retractor
To Fasten Your Belt
YR10301B
To fasten your seat belt, pull it out of the
retractor and insert the metal tab into the
buckle. There will be an audible “click” when
the tab locks into the buckle.
The seat belt automatically adjusts to the
proper length only after the lap belt portion is
adjusted manually so that it fits snugly around
your hips. If you lean forward in a slow, easy
motion, the belt will extend and let you move
B160B01A-AAT
Periodic Inspection
It is recommended that all seat belts be in-
spected periodically for wear or damage of any
kind. Parts of the system that are damaged
should be replaced as soon as possible.
B160C01A-AAT
Keep Belts Clean and Dry
Seat belts should be kept clean and dry. If belts
become dirty, they can be cleaned by using a
mild soap solution and warm water. Bleach,
dye, strong detergents or abrasives should not
be used because they may damage and weaken
the fabric.
B160D01A-AAT
When to Replace Seat Belts
Entire in-use seat belt assembly or assemblies
should be replaced if the vehicle has been
involved in an accident. This should be done
even if no damage is visible. Additional ques-
tions concerning seat belt operation should be
directed to your Hyundai Dealer.
B170A04Y-AAT
HEIGHT ADJUSTABLE FRONT SEAT
SHOULDER BELT
B170A01O
You can adjust the height of the shoulder belt
anchor to one of the 4 positions.
If the height of the adjusting seat belt is too
near your neck, you will not be getting the
most effective protection. The shoulder por-
tion should be adjusted so that it lies across
your chest and midway over your shoulder
nearest the door and not your neck.
To adjust the height of the seat belt anchor,
lower or raise the height adjuster into an
appropriate position. To raise the height ad-
juster, pull it up. To lower it, push it down while
pressing the height adjuster button.
Release the button to lock the anchor into
position. Try sliding the release button to
make sure that it has locked into the position.
WARNING:
o The height adjuster must be in the locked
position when the vehicle is moving.
o The misadjustment of height of the
shoulder belt could reduce the effec-
tiveness of the seat belt in a crash.
