FEATURES OF YOUR HYUNDAI
1- 14
B220B01A-AAT
Adjusting Your Seat Belt
Adjusting Your Seat Belt
Adjusting Your Seat Belt
Adjusting Your Seat Belt
Adjusting Your Seat Belt
SSA1090T
With a 2-point static type seat belt, the length
must be adjusted manually so it fits snugly
around your body. Fasten the belt and pull on
the loose end to tighten. The belt should be
placed as low as possible on your hips, not on
your waist. If the belt is too high, it could
increase the possibility of your being injured in
an accident.
Correct
Shorten
Too high
To fasten a 2-point static type belt, insert the
metal tab into the locking buckle. There will be
an audible "click" when the tab locks into the
buckle. Check to make sure the belt is prop-
erly locked and that the belt is not twisted.
B220A01A-AAT
SEAT BELTS (2-Point Static Type)
SEAT BELTS (2-Point Static Type)
SEAT BELTS (2-Point Static Type)
SEAT BELTS (2-Point Static Type)
SEAT BELTS (2-Point Static Type)
(Rear Seat Center)
(Rear Seat Center)
(Rear Seat Center)
(Rear Seat Center)
(Rear Seat Center)
To Fasten Your Seat Belt
To Fasten Your Seat Belt
To Fasten Your Seat Belt
To Fasten Your Seat Belt
To Fasten Your Seat Belt
SSA1090S
WARNING:
You should place the lap belt portion as
low as possible and snugly across your
hips, not on your waist. If the lap belt is
located too high on your waist, it may
increase the chance of injury in the event
of a collision. Both arms should not be
under or over the belt. Rather, one should
be over and the other under, as shown in
the illustration.
Never wear the seatbelt under the arm
nearest the door.
B210A01A-AAT
To Release the Seat Belt
YR10321B
The seat belt is released by pressing the re-
lease button in the locking buckle. When it is
released, the belt should automatically draw
back into the retractor.
If this does not happen, check the belt to be
sure it is not twisted, then try again.