FEATURES OF YOUR HYUNDAI
1- 16
Three child restraint hook holders are located
on the rear luggage compartment floor. To
install the child restraint seat, connect the
child restraint tether strap hook to the child
restraint hook holder and tighten to secure the
seat.
B230C02O-AAT
Installing a child Restraint seat
Rear luggage compartment floor
B230B01O-1
Anchorage
Front of Vehicle
Tether
Strap Hook
To install a child restraint hook holder, use a
5/16" 18 UNC thread bolt as indicated in the
illustration. You can damage the holder nut on
your vehicle if you force a bolt with a different
thread into the holder nut.
B230B02O
This symbol indicates the location of user
ready tether anchorage.
Bolt, Holder
(5/16" - 30 mm)
Washer, Conical Spring
Holder, Child Restraint Hook
Retainer Washer
it is satisfactory for use with this ve-
hicle.
o Never allow a child to stand up or kneel
on the seat.
o Never use an infant carrier or a child
safety seat that "hooks" over a seatback;
it may not provide adequate security in
an accident.
o Never allow a child to be held in a
person's arms while they are in a mov-
ing vehicle, as this could result in seri-
ous injury to the child in the event of an
accident or a sudden stop. Holding a
child in a moving vehicle does not pro-
vide the child with any means of protec-
tion during an accident, even if the per-
son holding the child is wearing a seat
belt.
B230B01A-AAT
Using a Child Restraint System
SSA1100B
