Hyundai Mobis TQ8-AC210A9GG, User Manual

Page: 299 / 332

9-97
Updating the software and map
1
Connect a USB device to the computer and run Navigation Updater for
downloading the update files.
2
Follow the instructions on the screen to download the update files.
3
Remove the USB device from the computer and then connect it to the
USB port in your vehicle.
4
Start the vehicle to turn on the system.
A
You can perform update without starting the vehicle by simply locating the start
switch to "ON".
Caution
• Perform update with the start switch "ON" when the battery is sufficiently charged
by driving the vehicle. When the battery is discharged while updating, the system
may get damaged with the update stopped.
-
Note that the battery may be discharged easily in winter.
-
The battery may also be discharged easily when the vehicle is not used for a long
time. Caution is required.
• When you start the vehicle while updating with the start switch "ON", power supply
to the system may be cut off.
5
On the All Menus screen, press Setup
>
General
>
SW Info/Update .
A After the system is turned on, press Yes when a pop-up window appears whether
to proceed with update. In this case, the screen changes to allow you to select the
update method.
[ Updating immediately
You can finish the update quickly.
1
On the SW Info/Update screen, press Update .
2
Press Update Now .
3
Press OK .
The update is performed immediately after the system reboots.