LITHIUM SERIES® II ELECTRIC TORQUE TOOL USER INTERFACE GUIDE
1
CONTROL PANEL
The control panel on the rear of the tool provides the primary user interface with high-resolution screen and three push
buttons. The user configures all bolting functions displayed on the screens using the push buttons. A visible status LED
and audible beeper also provide control indicators during operation.
POWER ON/OFF
The tool is powered on by pushing any of the three Push Buttons. Power may be turned off from the Home Screen by
pushing and holding the center button for approximately 3-seconds.
SWITCHES
The Tool contains a speed switch, a directional control switch and a trigger. The speed switch allows the user to switch
between Rundown (fast speed) and Torque (slow speed). The directional switch allows the user to switch between right-
hand (clockwise) and left-hand (counter clockwise) rotation. The trigger is pulled and held to actuate bolting operations.
COMMUNICATION
The tool is equipped with both Bluetooth® Wireless Technology and a USB port. These communication channels provide a
means for importing Job IDs and Profiles to the tool and exporting job data from the tool, as well as for firmware upgrade.
NOTE:
Bluetooth® is a registered trademark of the Bluetooth® Special Interest Group.
Beeper
LCD Screen
LED Status
Indicator
Push Buttons
CONTROL PANEL
SWITCHES
DUAL SPEED SWITCH
USB Port
Bluetooth®
Wireless Technology
Dual Speed Switch
Directional Switch
Trigger
1. CONTROL PANEL
